Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
I Ball 400W Power Supply
I Ball 400W Power Supply
No ratings
900/-
995/-
Save: 95/-
Inclusive of all taxes
Inclusive of all taxes
3 YEAR
Three years
Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
I Ball 400W Power Supply
Features
This I ball 400 Watt power supply from ATXPowerSupplies.com is one of our top selling power supplies with an atx form factor. Internal relay inside the power supply is actuated by the power switch connected to your motherboard. As you can see by the connectors this is an AMD and P4 compatible atx power supply.
Specification
-
Supportable: IntelP4, PIII, PII, Celeron all series CPU; AMD Duron, Athlon, Athlop Xp, K6-2 Series CPU; Cyrix VIA all Series CPU.
-
PG signal wide voltage design, prevent damaging of resetting, not working by unstable voltage.
-
100 percent ATE test,100 percent high temperature burn in test .
-
Super lower noise & ripple design, continuous 60000 work-hour without interrupt.
-
Multiple system protection circuit: over voltage, over current, over load, short, prevent to CPU, mother board and hard disk from damaging by unstable voltage.
-
Intelligent temperature controlled cooler design
-
Can be used for PIII motherboards with atx form & Improves performance of PC.
Technical Details
-
Brand: I BALL
-
Model : 400 WATTS
-
Form factor : ATX
-
5.75" Wide X 3.25" Tall X 5.5" Deep
-
One ATX : 2.03 connector
-
Connector : One 12V connector for P4 motherboards
-
Four IDE : 4 PIN connectors
-
Two Floppy : 4 PIN connectors
Specifications
| Model | |
|---|---|
| Brand | I BALL |
| Model | 400 WATTS |
| Spec | |
| Type | ATX12V v2.2 |
| Maximum Power | 400W |
| Main Connector | 1 x 24 Pin |
| +12V Rails | Single |
| PCI-E Connectors | 1 x 4-pin |
| Efficiency | 70% Typically |
| Over Voltage Protection |
|
| Overload Protection |
|
| Input Voltage | 200 - 240 VAC |
| Input Frequency Range | 47Hz ~ 63Hz |
| Output | 400W |
| MTBF | 100,000 hrs |
