Philips SPA1260 Multimedia Speakers 2.0

With their powerful 3W RMS stereo output and ultra-chic, high-gloss finish, Philips SPA1260/12 speakers look every bit as classy as they sound!

3W RMS total output power
This system has 3W RMS total output power. RMS refers to Root Mean Square which is a typical measurement of audio power, or rather, the electrical power transferred from an audio amplifier to a loudspeaker, which is measured in watts. The amount of electrical power delivered to the loudspeaker and its sensitivity determines the sound power that is generated. The higher the wattage, the better the sound power emitted by the speaker.

Convenient aux-in and headphone out on front of speaker
Now you can enjoy your favorite music and entertainment even easier and more conveniently, via the aux-in and headphone out jack on the front of these speakers. Usually, if you want to connect another device other than your PC you have to unplug the 3.5mm jack from the computer and that is not always expedient. But with the aux-in and headphone out connections on front you can quickly and easily listen to music straight from almost any device.

Bass Reflex Speakers deliver deep and powerful bass
A chamber behind the speaker driver that channels air to acoustically tuned vents built into the speaker give the bass notes a more punchy, realistic sound.

Well damped driver reduces vibration and sound distortion
A single speaker driver normally incurs a specific frequency division vibration near the edge of the diaphragm, often resulting in some sound distortion. This way to overcome this problem by using Mylar, a uniform monomer and a much lighter material that is more usually used, around the driver cone. Surrounding the cone in a perfectly symmetrical ring, the resulting damping effect suppresses the asynchronous vibration, resulting in a more balanced and natural sound.

Attractive high gloss finish
High-gloss 'Piano black' finish looks simply superb in both classic and modern interiors.

Technical Details

Brand : Phillips
Model : SPA1260

Product dimensions
Width: 14,5 cm
Height: 10,5 cm
Depth: 18 cm
Weight: 0,95 kg

Audio systems
Frequency range: 20Hz-20kHz
Input impedance: 10ohm
Output power in total: 3W
Power: 220V 50Hz
Signal/Noise ratio: >75dB
THD: <1%

Audio systems L/R channels
Audio power amplifier: Class-AB Amplifier
Channel separation: >45dB
Input sensitivity: 600mV
Rated output power: 1.5W X 2

Left/Right speakers
Driver power range: 1-5Wx2
Frequency range: 75Hz-20kHz
Norminal impedance: 4ohm
Sensitivity: 85dB(2.83V/1m)
Speaker driver: 2.5"

Connectivity
Cable length: 1.5 m
Connector: 3.5 mm stereo
Packaging content
Quick installation guide: Yes
Number of satellites: 2

Packaging dimensions
Depth: 13 cm
EAN: 87 12581 63982 2
Gross weight: 1,4 kg
Height: 17,2 cm
Nett weight: 1,1 kg

Number of products included: 1
Packaging type: Dummy
Tare weight: 0,3 kg
Type of shelf placement: Dummy
Width: 25,4 cm

Outer Carton
Gross weight: 5,9 kg
GTIN: 1 87 12581 63982 9
Height: 35,4 cm
Length: 27 cm
Nett weight: 4,4 kg
Number of consumer packagings: 4
Tare weight: 1,5 kg
Width: 26,2 cm