For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston 16GB DDR4-2666 CL19 SDRAM (KSM26ES8-16ME)
Kingston 16GB DDR4-2666 CL19 SDRAM (KSM26ES8-16ME)
9380/-
15000/-
Save: 5620/-
Inclusive of all taxes
Inclusive of all taxes
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston 16GB DDR4-2666 CL19 SDRAM (KSM26ES8-16ME)
Features
Kingston's KSM26ES8/16ME is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• Temperature sensor with integrated SPD
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
SPECIFICATIONS
Brand : Kingston
Model : KSM26ES8/16ME
Capacity : 16GB
Form Factor : DIMM
Type : 288-Pin DDR4 SDRAM
Speed : DDR4 2666
CAS Latency : 19
Timing : 19-19-19
Voltage : 1.2V
ECC : Yes
Buffered/Registered : Registered
Rank : 1Rx8
Heat Spreader : No
Specifications
| Model | |
|---|---|
| Brand | Kingston |
| Model | KSM26ES8-16ME |
| Spec | |
| Capacity | 16GB |
| Speed | DDR4 2666MHZ |
| Cas Latency | 19 |
| Voltage | 1.2V |
| ECC |
|
