Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston 4GB DDR3L 1333MHz Desktop RAM (KVR13LE9S8-4)
Kingston 4GB DDR3L 1333MHz Desktop RAM (KVR13LE9S8-4)
No ratings
3020/-
3322/-
Save: 302/-
Inclusive of all taxes
Inclusive of all taxes
Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston 4GB DDR3L 1333MHz Desktop RAM (KVR13LE9S8-4)
Features
Kingston KVR13LE9S8-4 is a 4GB DDR3L 1333MHz Desktop RAM. This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8, ECC, low voltage, memory module, based on nine 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.35V or 1.5V. This 240- pin DIMM uses gold contact fingers.
FEATURES
JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency : 9, 8, 7, 6
Programmable Additive Latency : 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length : 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Thermal Sensor Grade B
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 1.18” (30mm), single sided component
Technical details
Brand : Kignston
Model : KVR13LE9S8-4
CL(IDD) : 9 cycles
Row Cycle Time (tRCmin) : 49.5ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 260ns (min.)
Row Active Time (tRASmin) : 36ns (min.)
Maximum Operating Power : (1.35V) = 1.761 W* , (1.50V) = 1.957 W*
UL Rating : 94 V - 0
Operating Temperature : 0 °C to 85 °C
Storage Temperature : -55 °C to +100 °C
FEATURES
JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency : 9, 8, 7, 6
Programmable Additive Latency : 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length : 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Thermal Sensor Grade B
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 1.18” (30mm), single sided component
Technical details
Brand : Kignston
Model : KVR13LE9S8-4
CL(IDD) : 9 cycles
Row Cycle Time (tRCmin) : 49.5ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 260ns (min.)
Row Active Time (tRASmin) : 36ns (min.)
Maximum Operating Power : (1.35V) = 1.761 W* , (1.50V) = 1.957 W*
UL Rating : 94 V - 0
Operating Temperature : 0 °C to 85 °C
Storage Temperature : -55 °C to +100 °C
Specifications
| Model | |
|---|---|
| Brand | Kingston |
| Model | KVR13LE9S8-4 |
| Spec | |
| Type | Desktop Ram |
| Capacity | 4GB |
| Speed | 1333Mhz |
| Cas Latency | 9, 8, 7, 6 |
| Timing | 9 |
| Voltage | 1.5V |
