Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston HyperX Savage Red 8GB DDR3 2133MHz Memory (HX321C11SR-8)
Kingston HyperX Savage Red 8GB DDR3 2133MHz Memory (HX321C11SR-8)
No ratings
5665/-
Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston HyperX Savage Red 8GB DDR3 2133MHz Memory (HX321C11SR-8)
Features
HyperX HX321C11SR/8 is a 1G x 64-bit (8GB) DDR3-2133 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR3-2133 at a low latency timing of 11-12-12 at 1.6V. The SPDs are programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers.
Features
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does notallow seamless read or write (either on the fly using A12 orMRS)
Bi-directional Differential Data Strobe
Internal (self) calibration : Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
Asynchronous Reset
Height 1.311” (33.30mm), w/heatsink, double sided component
Technical details
Brand : Kingston
Model : HX321C11SR-8
CL(IDD) : 11 cycles
Row Cycle Time (tRCmin) : 48.125ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 260ns(min.)
Row Active Time (tRASmin) : 35ns(min.)
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0oC to +85oC
Storage Temperature : -55o C to +100oC
Features
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does notallow seamless read or write (either on the fly using A12 orMRS)
Bi-directional Differential Data Strobe
Internal (self) calibration : Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
Asynchronous Reset
Height 1.311” (33.30mm), w/heatsink, double sided component
Technical details
Brand : Kingston
Model : HX321C11SR-8
CL(IDD) : 11 cycles
Row Cycle Time (tRCmin) : 48.125ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 260ns(min.)
Row Active Time (tRASmin) : 35ns(min.)
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0oC to +85oC
Storage Temperature : -55o C to +100oC
Specifications
| Model | |
|---|---|
| Brand | Kingston |
| Model | HX321C11SR-8 |
| Spec | |
| Type | DDR3 |
| Capacity | 8GB |
| Speed | DDR3 2133MHz |
| Cas Latency | 11-12-12 |
| Timing | 11 |
| Voltage | 1.6v |
