Swiftech H320 CPU Liquid Cooling Kit

The H320 CPU cooler is an extreme performance All-In-One (AIO) CPU liquid cooling system focused on low to inaudible operating noise. It's thermal performance compared to the H220, truly rivals that of high-end custom kits thanks to its oversize triple 120mm radiator.

The H320 comes factory pre-filled, completely plug-and-play for installation, and is maintenance-free during its 3 year warranty period. It differentiates itself from other AIO's by its ability to support additional liquid cooled components such as graphics cards, chipset,  and/or additional radiator(s). Both the pump and the fans are PWM compliant devices, allowing the H320 to be recognized and speed-controlled by the motherboard depending on CPU temperature like any standard CPU cooler. As a bonus, the system includes a PWM splitter allowing connection of up to 8 PWM devices which can then be controlled as one by the motherboard.

Features

From virtually silent to comfortable audible noise levels
Our design objective for this product was to minimize the operating noise while preserving high thermal performance characteristics. At its lowest speed settings, the system is virtually inaudible. At its maximum speed, the H320 remains within comfortable audible noise levels.

Plug-and-Play
The H320 is the easiest AIO liquid cooling kits to install bar none, and is even easier to setup than many high-end air coolers.

Expandability
The H320 differentiates differentiates itself from other AIO's by its ability to support additional liquid cooled components such as graphics cards, chipset,  and/or additional radiator(s).

Reliability
Both fans and pump are rated for a 60,000 MTBF (Meantime Between Failures)

Technical Details

Model

Brand : Swiftech
Model : H320

Radiator

Material : Brass tubes, louvered copper fins 
Body dimensions : 389mm x 128mm x 29mm 
Fill-port thread class : G 1/4 
Reservoir capacity : 90 cc 
Barb fittings : Integrated swivel 90° elbows, 3/8" (10mm) OD 
Installation hardware : Standard: (8) coarse thread fans screws, Alternate: (8) 6-32 x 1 3/16 (30mm)  Philips screws
ROHS : Compliant

Pre-installed Fan

Dimensions : 120mm x 120mm x 25mm 
Speed control : PWM 
Speed range : 800+/- 25% ~ 1800+/- 10%  RPM 
Airflow range : 24 ~ 55 CFM 
Static pressure range : 0.53 ~ 2.29 mmH20 
Noise level range : <16 ~ <33 dB/A 
Nominal Voltage : 12 v 
Nominal current : 0.2 A 
Bearing Type : Z-axis 
Connector : Mini 4-pin 
MTBF : 60,000 hours 
ROHS : Compliant

Waterblock with integrated pump

Cold plate material :C110 copper 
Cooling engine : 0.25mm x 0.25mm  micro-pin array 
Barb fittings : Integrated swivel 90° elbows, 3/8" (10mm) OD
Speed control : PWM 
Speed range : 1200 ~ 3000 RPM 
Nominal voltage : 12 v 
Nominal power : 6 W 
Bearing type : Ceramic shaft, PTFE bearing 
Connector : Mini 4-pin 
MTBF : 60,000 hours 
ROHS : Compliant

Tubing & Coolant

Material : PVC 
Color : Black 
Dimensions : 5/8" x 3/8" (16/10mm) 
Length : 15 3/4" (400mm) 
Coolant : Pre-filled with Hydrx PM-2 non-toxic coolant

Clamps

Material : Black anodized aluminum

PWM splitter

PWM Ports : 8 
RPM signal port : Channel 1 
Power connector : Sata 
PWM/RPM connector : Mini 4-pin 
Installation hardware : Peel-off sticker,  mounting screws & nuts 
ROHS : Compliant