Thermaltake Water 3.0 120 ARGB Sync (CL-W232-PL12SW-A)

DESIGN
All-in-one 120mm liquid cooler with PWM fan that supports 5V RGB capable motherboards.

Water 3.0 120 ARGB Sync Edition
Thermaltake Water 3.0 120 ARGB Sync Edition comes with one 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance and greater CPU protection!

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

Pure 12 ARGB Sync Radiator Fan
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.

Switch LED Modes with ARGB Controller
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.

High Efficiency Radiator
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.

High Performance Waterblock
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.

High Quality Pump
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Easy Installation
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.

SPECIFICATION
P/N : CL-W232-PL12SW-A
WEIGHT : 920 g
PUMP : Motor Speed: 3000 RPM, Rated Voltage: 12 V & 5V, Power Input: 12V – 3.9 W , 5V – 1.06 W
WATER BLOCK : Material: Copper
FAN : Dimension: 120 x 120 x 25 mm, Speed: PWM 500~1500 R.P.M (2510-4PIN), Noise Level: 25.8 dB-A, Rated Voltage: 12 V & 5V, Power Input: 12V- 1.44 W, 5V – 1.6W, Max. Air Flow: 56.45 CFM
Max. Pressure: 1.59 mm-H2O, LED Control: ARGB controller or 5V addressable RGB header on motherboard
TUBE : Length: 326mm, Material: Rubber
RADIATOR : Dimension: 151 x 120 x 27 mm
COMPATIBILITY : Intel : LGA 2066/20113/2011/1366/1156/1155/1151/1150, AMD : FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)