Fractal Design Celsius+ S24 Dynamic Liquid CPU Cooler - Non-RGB (FD-W-2-S2401)

Celsius+ S24 Dynamic
Celsius+ takes AIO water cooling to a new level with an ARGB-accented pump face, a fully redesigned block and an upgraded on-radiator PWM fan hub with ARGB support.

• Tinted glass pump face with backlit logo and ARGB LED effects
• Articulating elbow fittings make tubes easier to route and reduces tension on the pump
• Backed by a 5-year warranty for extended peace of mind

Cool, quiet and colorful
Stylish glass pump face with backlit logo and ARGB LED effects

Outstanding airflow
High-performance Dynamic PWM fans for excellent airflow and minimal noise

Optimized fan geometry balances airflow with extra emphasis on static pressure

Strategic blade notches diffuse noise from blade/stator interaction

Trip Wire technology reduces blade turbulence

LLS (Long Life Sleeve) fan bearings provide silent operation with a long lifespan

Get the balance right
Our intelligent auto mode dynamically adjusts the fan and pump speeds for optimized silent performance – and a simple twist of the pump face changes to PWM mode for full user control

Tidier through technology
ARGB-enabled PWM hub places all fan connections directly on the radiator for a clutter-free installation

Forget the thermal paste
With the Celsius+, the thermal paste is pre-applied to ensure a mess-free installation

Color-coordinated cooling
Your options for controlling the color effects of Celsius+ are continually growing, with current certifications including Asus AURA, Gigabyte Fusion, MSI Mystic Light, Razer Chroma and ASRock Polychrome support

Mounting made easy
Supports the most common sockets for both Intel and AMD

Up our sleeves
Braided tube sleeves readily contain both the fan control cables and ARGB wires.

Technical Details
 
Brand : Fractal Design
Model : FD-W-2-S2401

General specifications
Sockets supported (Intel) : 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066
Sockets supported (AMD) : AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+
Coldplate material : Copper
Thermal paste : Pre-applied
Tube length : 400 mm
Tube material : Low-permeability rubber with braided nylon sleeve
Fittings, block side : Articulating 90-degree elbow
Fittings, radiator side : Straight rotary
Fan control : Dual mode (Auto/PWM)
Note: The Celsius+ is NOT compatible with the Adjust R1

Fan specifications
Fan type : Dynamic X2 GP-12 PWM
Rotational speed : 500 – 2000 RPM
Bearing : LLS
PWM control : Yes
Acoustical noise (full speed) : 32.2 dBA
Maximum air flow : 87.6 CFM
Maximum static pressure : 2.3 mm H2O
Input voltage : 12V DC
Maximum input current : 0.2A
MTBF : 100,000 hours

Pump specifications
Rotational speed : 800-2800 RPM in normal use, 3500 RPM during thermal protection mode that activates if liquid temperature is over 60°C
Bearing type : Ceramic bearing and shaft
PWM control : Yes
Acoustical noise (full speed) : 20 dBA
Maximum pressure : 14.4 kPa / 1.46 mm H2O /2.0 PSI
Input voltage : 12V DC
Input current (without fans) : 0.36A
MTTF : 50,000 hours
Block height : 45 mm
Block measurements (with fittings) : 86 x 75 mm
Block diameter (main block body) : 62 mm

Radiator specifications
Dimensions : 122 x 31 x 284 mm
Housing material : Aluminum
Fin material : Aluminum
Fan screw threads : 6-32

Other
Package contents 
Celsius+ S24 unit, 2x 120 mm fans, User manual, Mounting hardware for all listed sockets, Fan and radiator mounting screws