Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston HyperX Fury 8GB DDR4 2133 MHz UDIMM (HX421C14FB2-8)
Kingston HyperX Fury 8GB DDR4 2133 MHz UDIMM (HX421C14FB2-8)
No ratings
6215/-
7000/-
Save: 785/-
Inclusive of all taxes
Inclusive of all taxes
Insurance Free Transit Insurance to protect your order from damage or pilferage
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
For any enquiries about availability and stock of products, please feel free to call customer care at (044)-4211 0647 (Direct Line)
What's in the box
Kingston HyperX Fury 8GB DDR4 2133 MHz UDIMM (HX421C14FB2-8)
Features
HyperX HX421C14FB2/8 is a 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanicalspecifications are as follows
Features
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) fordata, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.340” (34.04mm), w/heatsink
Technical details
Brand : Kingston
Model : HX421C14FB2-8
CL(IDD) : 14 cycles
Row Cycle Time (tRCmin) : 46.5ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) :350ns(min.)
Row Active Time (tRASmin) : 32.75ns(min.)
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0oC to +85oC
Storage Temperature : -55oC to +100oC
Features
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) fordata, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.340” (34.04mm), w/heatsink
Technical details
Brand : Kingston
Model : HX421C14FB2-8
CL(IDD) : 14 cycles
Row Cycle Time (tRCmin) : 46.5ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) :350ns(min.)
Row Active Time (tRASmin) : 32.75ns(min.)
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0oC to +85oC
Storage Temperature : -55oC to +100oC
Specifications
| Model | |
|---|---|
| Brand | Kingston |
| Model | HX421C14FB2-8 |
| Spec | |
| Capacity | 8GB |
| Speed | DDR4 2133MHz |
| Cas Latency | 14 |
