Lian Li Lancool II Mesh RGB Case - Black

BORN TO PUSH THE LIMITS

LANCOOL II MESH RGB features a mesh front panel and mesh bottom left shroud panel,honeycomb vent design and built-in RGB fans,ensuring bountiful airflow delivered to your high-performance components while adorning the system with an RGB touch.

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

Premium look

Unprecedented modularity

Hinged flip panels all around

Optimized cooling support

Cable management with ease

Optimized storage configuration

MORE ADVANCED COOLING SUPPORT

The optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance ARGB cooling fans.

HIGH-PERFORMANCE BUILT-IN ARGB FANs

3 x 120mm ARGB intake fans pre-installed at the front produce ample airflow while still offering bountiful RGB to liven up your PC build.

ULTIMATE COOLING SUPPORT

Add the BORA DIGITAL ARGB FANs to have more vibrant RGB and increased cooling efficiency for your LANCOOL II MESH build!

EXPERIENCE ARGB CONTROL ON A WHOLE NEW LEVEL

Lighting effects of the 3 included ARGB fans can be fully controlled through the C button and M button located on the top front. Switching between 8 lighting modes has never been this easy.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers for either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on  the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

ATTENTION!

Do not install a 140/280MM radiator in the inner side of the bracket otherwise irreparable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

REMOVABLE TWO-WAY CABLE MANAGEMENT BAR

Flippable, flexible, multi-functional

FLIP PANELS AND SHROUDs ALL AROUND

The tempered glass side panels offer an unobstructed view to the interior configuration while the bottom shroud panels provide quick access to PSU/drive installation.

CABLE MANAGEMENT WITH EASE

The cover plates save users neck and fingers by concealing nearly all the wayward cables.

MESH PANEL KIT

Mesh front panel is available for those LANCOOL II users craving to upgrade their system by swapping to a mesh front panel.

Technical Details

Brand : Lian Li

Model : Lancool II Mesh RGB

Dimensions : (D) 478mm x (W) 229mm x (H) 494mm

Motherboard : E-ATX(width: under 280mm)/ATX/M-ATX/ITX

PSU : 210mm

Color : black

Materials            

0.8mm SGCC (exterior, MB tray, and most of the interior)

4.0mm tempered glass (both sides)

1.0mm SGCC (interior)

Fan Support       

Front (multi-way fan/radiator bracket): 3 x 120mm or 2 x 140mm

Top: 2 x 120/140mm

Rear: 1 x 120mm

Above PSU Chamber: 2 x 120mm

Radiator             

Front (multi-way fan/radiator bracket): 1 x 360/280/240mm

Top: 1 x 240mm (aligned to the left)

VGA Length : 384mm

CPU Clearance : 176mm

Drive     

Behind MB Tray: 2 x 2.5″ SSD

Behind the right flip panel: 2 x 2.5”SSD

Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD

Above PSU Chamber: 2 x 2.5″ SSD

Slot : 7

I/O Ports             

C button for color control

M button for lighting mode control

1 x TRRS AUDIO

2 x USB 3.0

1 x USB 3.1 TYPEC (Optional)

Dust Filters         

1 x Top (magnetic), 1 x Bottom (tray)

Incl Fans             

3 x included 120mm 3-PIN 1300 RPM ARGB fans

Rated Speed:1300RPM ±10 %

Air Flow:49.14CFM

Noise:25.0dB(A)