Western Digital Ultrastar DC HC330 10TB SAS Hard Drive (0B42258)

Mid-capacity Drives The Ultrastar DC HC300-series provides low to mid-capacity drives that are economical to acquire, yet deliver quick and reliable data access for traditional data center applications.   Economical Capacities and Fast Data Access Key Requirements for HDDs in the Data Center IT managers need to offer storage tiers as they deploy purpose-built solutions to meet their on-prem, off-prem & cloud storage requirements.  While helium filled drives enable the highest capacities, air-filled drives offer important benefits.  With a lower TCA (total cost of acquisition), legacy options, and higher access density (IOPs/TB), they are the perfect choice for maintaining a desired level of performance while allowing customers to tailor budgets to meet their needs. The Ultrastar® DC HC300-series help to address data center requirements by providing capacities from 4TB to 10TB1 while increasing performance over prior generations.  They are designed for a variety of applications including traditional storage arrays, rack-mounted storage enclosures and server-based distributed storage systems, as well as distributed and scalable computing, including block and file storage architectures.  They are offered at 7,200 RPM with either 6Gb/s SATA or 12Gb/s SAS interface in Advanced Format 4Kn and512e format4. A 512n option is also available on 4TB models to support legacy systems with native 512-byte block sizes.   Technology Innovation Delivers Efficiency and Performance for Traditional and Legacy Systems Ultrastar DC HC300-series are based on a proven and cost-efficient air-based HDD platform design, with Conventional Magnetic Recording (CMR) technology in a 3.5-inch large form factor.  These HDDs leverage common hardware and firmware while featuring a second-generation, dual-stage microactuator to enhance head positioning accuracy for better drive performance.  Write performance gains are also supported by Western Digital’s media cache architecture, a disk-based caching technology that provides a large cache area on the disk, improving reliability and data integrity. Finally, the addition of a flash-based non-volatile cache (NVC) on both SATA and SAS models helps improve write performance.   Economical Capacities and Fast Data Access Key Requirements for HDDs in the Data Center IT managers need to offer storage tiers as they deploy purpose-built solutions to meet their on-prem, off-prem & cloud storage requirements. While helium filled drives enable the highest capacities, air-filled drives offer important benefits. With a lower TCA (total cost of acquisition), legacy options, and higher access density (IOPs/TB), they are the perfect choice for maintaining a desired level of performance while allowing customers to tailor budgets to meet their needs. The Ultrastar® DC HC300-series help to address data center requirements by providing capacities from 4TB to 10TB while increasing performance over prior generations. They are designed for a variety of applications including traditional storage arrays, rack- mounted storage enclosures and server-based distributed storage systems, as well as distributed and scalable computing, including block and file storage architectures. They are offered at 7,200 RPM with either 6Gb/s SATA or 12Gb/s SAS interface in Advanced Format 4Kn and512e format4. A 512n option is also available on 4TB models to support legacy systems with native 512-byte block sizes.   Technology Innovation Delivers Efficiency and Performance for Traditional and Legacy Systems Ultrastar DC HC300-series are based on a proven and cost-efficient air-based HDD platform design, with Conventional Magnetic Recording (CMR) technology in a 3.5-inch large form factor. These HDDs leverage common hardware and firmware while featuring a second-generation, dual-stage microactuator to enhance head positioning accuracy for better drive performance. Write performance gains are also supported by Western Digital’s media cache architecture, a disk-based caching technology that provides a large cache area on the disk, improving reliability and data integrity. Finally, the addition of a flash-based non- volatile cache (NVC) on both SATA and SAS models helps improve write performance.   Data Security with Trusted Quality, Reliability Compliance and privacy requirements drive the need for increased data security. The Ultrastar DC HC300-series offers security and encryption options to help protect data from unauthorized use, including SED models in both SATA & SAS. An SED-FIPS validated version is available in a SAS configuration. The Ultrastar DC HC300-series extend Western Digital’s long-standing tradition of reliability leadership with a 2M-hour MTBF rating, workloads up to 550TB per year, and a 5-year limited warranty.   Highlights •4TB-10TB capacity points support both OEM & cloud deployments as well as traditional IT systems •Leverages common hardware & firmware to minimize redundant testing needs •Sustained transfer rate up to 262MB/s •Advanced Format 4Kn and 512e format4 •Self-Encrypting Drive options •5-year limited warranty   Applications and Workloads •Distributed file systems, like Apache Hadoop®, to support Big Data analytics •Rack-mounted storage enclosures •Server based distributed storage systems. •Direct & Network Attached Storage (DAS & NAS) •RAID   Technical Details : Brand : Western Digital Model : 0B42258   Full Specifications :  Capacity : 10 TB Interface : SAS Security : SE Disk Speed (RPM) : 7200rpm Cache Size (MB) : 256MB Weight : 750gms Transfer Rate : up to 250MB/s Dimensions (L x W x H) : 5.79" x 4" x 1.03"   Configuration 12Gb/s Capacity : 10TB Form Factor : 3.5-inch Sector Size (bytes) : 512n*/512e: 512, 520, 528 4Kn: 4096, 4104, 4160, 4224 Max. Areal Density (Gbits/sq. in., max) : 869    Performance Data Buffer6 (MB) : 256 Rotational Speed (RPM) : 7200 Latency Average (ms) : 4.16 Interface Transfer Rate (MB/s, max) : 1200 Sustained transfer rate6 (MB/sec, max) / (MiB/sec, max) : 273/260    Reliability Error Rate (non-recoverable bits read) : 1 in 1015 Load/Unload Cycles (at 40°C) : 600,000 MTBF2 : 2M hours Annual Failure Rate (AFRƜ : 0.44% Availability (hrs/day x days/wk) : 24x7 Limited Warranty (yrs) : 5   Acoustics Idle/Operating  (Bels, typical) : 3.4/3.8    Power Requirement : +5V, +12V Operating (W, typical) : 12.4  Idle (W) : 9.0    Physical Size z-height (mm, max) : 26.1 Dimensions (width x depth, mm) : 101.6 (+/-0.25) x 147 Weight (g, max) : 750   Environmental (Operating) Ambient Temperature : 5° to 60°C Shock (half-sine wave, 2ms, G) (Read/Write) : 70/50  Vibration (G RMS, 5 to 500Hz) : 0.67 (XYZ)   Environmental (Non-operating) Ambient Temperature : -40° to 70°C Shock (half-sine wave, 2ms, G) : 250  Vibration (G RMS, 2 to 200Hz) : 1.04 (XYZ)   Compatibility Compatible with Windows, Windows Server and Linux