D-Link Nuclias Connect AX1800 Wi-Fi 6 Access Point (DAP-X2810)

Nuclias Connect AX1800 Wi-Fi 6 Access Point
The Wi-Fi 6 ready DAP-X2810 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect. 

Nuclias Connect
A Premium Wi-Fi 6 Solution That Keeps Data Flowing Even In The Most Device-Dense Areas

Hails The End of Slow Business
The DAP-X2810 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%

Wi-Fi That Turbo Boosts Business Performance
With the DAP-X2810 by your side, it’s all systems go. It is fully prepared to handle all day-to-day demands of busy SMBs. Equipped with Wi-Fi 6, there are massive performance improvements, as well as all the features of 11ac now available for the 2.4 GHz band too.

Take a Load Off and Let Your AP do the Hard Work
The DAP-X2810’s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user – the perfect balancing act.

No-Wait Wi-Fi Even at Peak Time with MU-MIMO
Equipped with the latest 802.11ax MU-MIMO technology and 1800 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times.

Free Nuclias Connect Remote Centralized Management Software
D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.

The Beating Heart of Your Network
At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.

Technical Detail
Brand : D Links
Modal : DAP-X2810

Technical Spec
Device Interfaces 1 x 10/100/1000 Mbps (PoE) Ethernet LAN,
1 x RJ45 console port, factory reset, power input
LEDs Power/Status
Antennas 2 x dual-band internal antennas
Antenna Gain 3.2 dBi (2.4 GHz), 4.3 dBi (5 GHz)
Data Signal Rate1 2.4 GHz - Up to 575 Mbps
5 GHz - Up to 1200 Mbps
Functionality
Standards IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3u/ab, IEEE 802.3az
Energy-Efficient Ethernet (EEE), IEEE 802.3at PoE
Operating Frequency 2.4 - 2.483 GHz, 5.15 - 5.35 GHz, 5.47 - 5.85 GHz
Security Protocol WPA/WPA2/WPA3™ Personal/Enterprise, WEP
64/128-bit, SSID broadcast disable, MAC
address access control, internal RADIUS server
Software
Network Management Web (HTTP), Secure Socket Layer (SSL),
Traffic control, D-Link Nuclias Connect
Physical
Power Supply Connect 12 V / 2.5 A (optional power
adapter not included), IEEE 802.3at PoE
Max. Power Consumption 19.44 W
MTBF > 30,000 hours
Operating Temperature 0 ˚C to 40 ˚C
Storage Temperature -20˚C to 65 ˚C
Operating Humidity 10% to 90%
Storage Humidity 5% to 95%
Weight 477.4 g
Dimensions 170 x 170 x 28 mm
Certifications CE, FCC