Gigabyte GeForce RTX 3060 Ti EAGLE OC D6X 8G GDDR6X (GV-N306TXEAGLE OC-8GD)

WINDFORCE 3X COOLING SYSTEM
The WINDFORCE 3X cooling system features three 80mm unique blade fans, alternate spinning, 4 composite copper heat pipes direct touch GPU, 3D active fan and Screen cooling, which together provide high efficiency heat dissipation.

ALTERNATE SPINNING
Alternate Spinning can reduce the turbulence of adjacent fans and increase air pressure.

SMOOTH AIRFLOW
GIGABYTE turns the adjacent fans in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.

3D ACTIVE FAN
The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU is in a low load or low power game.

UNIQUE BLADE FAN
The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface.

GRAPHENE NANO LUBRICANT
Graphene nano lubricant can extend the life of sleeve bearing fan by 2.1 times, close to the life of double ball bearing, and is quieter.

HEAT PIPES DIRECT TOUCH
The shape of the pure copper heat pipe maximizes the direct contact area with the GPU. The heat pipe also covers the VRAM through a large metal plate contact to ensure proper cooling.

PROTECTION METAL BACK PLATE
The metal back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.

ULTRA DURABLE
Ultra Durable certified highest-grade metal chokes, lower ESR solid capacitors, 2oz copper PCB, and lower RDS(on) MOSFETs, plus over-temperature design to deliver superior performance and longer system life.

FRIENDLY PCB DESIGN
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.

GIGABYTE CONTROL CENTER
GIGABYTE CONTROL CENTER (GCC) is a unified software for all GIGABYTE supported products. It provides an intuitive interface that allows users to adjust clock speed, voltage, fan mode and power target in real-time.

Technical Detail
Brand : Gigabyte
Modal : GV-N306TXEAGLE OC-8GD

Technical Spec
Graphics Processing : GeForce RTX™ 3060 Ti
Core Clock : 1680 MHz (Reference Card: 1665 MHz)
CUDA® Cores : 4864
Memory Clock : 19000 MHz
Memory Size : 8 GB
Memory Type ; GDDR6X
Memory Bus ; 256 bit
Memory Bandwidth (GB/sec) : 608 GB/s
Card Bus : PCI-E 4.0
Digital max resolution ; 7680x4320
Multi-view : 4
Card size : L=282 W=115 H=41 mm
PCB Form : ATX
DirectX : 12 Ultimate
OpenGL : 4.6
Recommended PSU : 750W
Power Connectors : 8 pin * 2
Output : DisplayPort 1.4a *2, HDMI 2.1 *2
SLI Support : N/A
Accessories : Quick guide