What's in the box
Noctua NA-SAV3 Anti-Vibration Mounts
FREE SHIPPING AND COD FOR CHENNAI AND BANGALORE (*-For selected pincodes only)
Availability of COD/FS
What's in the box
Noctua NA-SAV3 Anti-Vibration Mounts
The NA-SAV3 is a fan accessory set consisting of 16 NA-AV3 anti-vibration mounts for up to four fans. Replacing standard fan screws, the NA-AV3 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. Five defined, numbered pawls allow the NA-AV3 to work perfectly with both standard open corner fans (pawl 1) and 10, 14, 15, 20 or 25mm thick fans with closed corners (pawls 2 to 5). This makes the NA-AV3 ideal for slim fans where other anti-vibration mounts may not fit properly.
Vibration-free installation for lower noise emission
Fans installed with standard fan screws can transmit minute vibrations to the PC case, which can lead to annoying resonance noises. Switching standard fan screws for NA-AV3 mounts can drastically reduce these structure-borne noises by effectively decoupling the fan from the PC case.
Double-side design
Compared to conventional single-side anti-vibration mounts, the NA-AV3’s double-side design makes them much easier to work with in space-restricted environments or placements where the fan’s mounting holes are difficult to reach.
Extra soft and highly tear-proof
The use of premium-grade silicone makes the NA-AV3 mounts both extra soft and highly tear-proof, allowing them to combine efficient decoupling with excellent longevity and ease of use.
5 defined pawls
Thanks to its five defined, numbered pawls, the NA-AV3 mounts are convenient to install even with 10, 14, 15 or 20mm deep fans (e.g. NF-A4x10, NF-A9x14, NF-A6x15, NF-A4x20) or 25mm fans with closed corners.
Compatible with all Noctua fans and many third-party fans
The NA-AV3 mounts are ideal for the vibration-free installation of all current Noctua fans (including redux and industrialPPC models) as well as many third-party fans.
Technical detail
Brand : Noctua
Modal : NA-SAV3
Technical Spec
Colour : brown
Fan compatibility : all Noctua fans, many third-party fans
Scope of delivery : 16x NA-AV3 anti-vibration mounts
Model | |
---|---|
Brand | Noctua |
Model | NA-SAV3 |
Spec | |
Cable Length | NA |
Voltage | |
Dimensions | 8.1 x 0.5 x 0.5 Centimeters |
Type | Anti-vibration mounts |
Material | Silicone |
Connectors | all Noctua fans, many third-party fans |
Ready for Immediate Dispatch
Product is in stock and will be dispatched within 24 hours.
Out of Stock
Product is out of stock. Product is an existing current model but stock arrival status unknown.
In Stock
Stock is available and will be dispatched in 2 to 3 days.
Against Order
Product is listed and available as per Company notification but availability dependent on stock status with
distributor.
Pre Order
Product expected anytime soon within 2 days to 2 weeks. Book your product. Full refund if not available
within 2 Weeks.
Cyber Space Abacus Pvt Ltd
E-28 , Ramaniyam Arcade, 5th Floor,
16th Cross St, Besant Nagar,
Chennai - 600090
Phone: 044-42110647, 09962302488
Service: service@theitdepot.com
Sales: sales@theitdepot.com
Working Hours: Monday-Saturday : 10:30am - 6:00pm
Sunday: Holiday
Cyber Space Abacus Pvt Ltd
Building No 49, Anantesh Mahal,
Wilson Garden, Bangalore,
Karnataka - 560027.
Phone: 09962302488
Service: service@theitdepot.com
Sales: sales@theitdepot.com
Working Hours: Monday-Saturday : 10:30am - 6:00pm
Sunday: Holiday