Themaltake Toughpower GF A3 Gold 1050W 80 Plus Gold Fully Modular Power Supply (PS-TPD-1050FNFAGD-H)

Themaltake Toughpower GF A3 Gold 1050W 80 Plus Gold Fully Modular Power Supply (PS-TPD-1050FNFAGD-H)
Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline)
The native 16 PIN (12VHPWR) PCIe connector of the GF A3 1050W can deliver up to 600W for PCIe 5.0 graphics cards.

Power Up the Next Generation Hardware
To fully support next-gen hardware, Toughpower GF A3 Gold Series (650W/750W/850W/1050W/1200W) is designed to meet ATX 3.0 standards, including a PCIe Gen 5.0 12VHPWR connector. The GF A3 Gold series delivers 80 PLUS Gold efficiency, it also offers stability, durability, and reliability.

Fully Compatible with Intel ATX 3.0 Standards
Toughpower GF A3 Gold series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards.

PCIe Gen 5.0 Ready
Toughpower GF A3 Gold series comes with a 16pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline)
The native 16 PIN (12VHPWR) PCIe connector of the GF A3 1050W can deliver up to 600W for PCIe 5.0 graphics cards.

Be Smart, Stay Quiet
Featuring a 120mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will not spin until the load exceeds 30% of the power supply, minimizing undesired noise.

High Amperage Single +12V Rail & High-Class Technologies
Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.

Built-in Industrial Grade Protection
To protect the hardware, GF A3 is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).

Fully Modular Low-Profile Flat Cables
Offers cable selection for users while powering the system at an advantageous voltage. Low-profile black cables make cable management easier, reduces clutter and increases airflow inside the chassis.

Technical Detail
Brand : Themaltake
Model : PS-TPD-1050FNFAGD-H

Technical Spec
WATTS : 1050W
MAX. OUTPUT CAPACITY : 1050W
COLOR : Black
DIMENSION ( W / H / D ) : 150mm(W)x86mm(H)x140mm(D)
PFC (POWER FACTOR CORRECTION) : Active PFC
POWER GOOD SIGNAL : 100-250 msec
HOLD UP TIME : > 17msec
INPUT CURRENT : 15A Max.
INPUT FREQUENCY RANGE : 50Hz - 60Hz
INPUT VOLTAGE : 100 - 240Vac
OPERATING TEMPERATURE : 0°C to + 45°C
OPERATING HUMIDITY : 5% to 85%,non-condensing
STORAGE TEMPERATURE : -40°C to + 70°C
STORAGE HUMIDITY : 5% to 95%, non-condensing
COOLING SYSTEM : 12cm FDB Fan
EFFICIENCY : Meet 80 PLUS Gold at 115Vac input.
MTBF : 100,000 hrs minimum
SAFETY APPROVAL : CE/FCC/UKCA/ICES/LVD/TUV/cTUVus/CB/CCC/BSMI
PCI-E 6+2PIN : 5
PCIE 12+4PIN : 1(600W)