Thermaltake Divider 370 TG Snow ARGB Mid Tower Chassis (CA-1S4-00M6WN-00)

Thermaltake Divider 370 TG Snow ARGB Mid Tower Chassis

The Divider 370 TG Snow ARGB is an ATX mid tower case that comes with three preinstalled 120mm ARGB PWM fans, one tempered glass window on the left side, and can support up to a 360 mm radiator at the front and top.

Divider 370 TG Snow ARGB Mid Tower Chassis

Thermaltake designed a brand-new case series that containing stylish side panels and powerful airflow performance blending all the functionality into the Divider Series.The most exceptional feature of the Divider 370 TG Snow ARGB Mid Tower Chassis is that the stylish panel is comprised of a steel panel and a 3mm tempered glass window on the left side. The side panel is visually divided to create an unique look, and it is tool-free and easy to remove. The Divider 370 TG Snow ARGB Mid Tower Chassis is the next-gen gaming PC case for regular users, enthusiasts, and gamers, giving them unprecedented satisfaction.

Unique Side Panels Design with a Tempered Glass Window

The exceptional feature of the Divider 370 TG Snow ARGB is that the unique panel that comprised of a steel panel and a 3mm tempered glass window on the left side. The side panel is visually divided to create an unique look, and it is tool-free and easy to remove. Tempered glass window is thicker and more scratch-resistant compared to standard acrylic.

Mesh Front Panel

The Divider 370 TG Snow ARGB comes with a large airflow-optimized stylish mesh panel at the front, , offering a unique divided design and additional air intake through the mesh.

Three Preinstalled ARGB PWM Fans

The Divider 370 TG Snow ARGB comes with three pre-installed hydraulic bearing 120mm ARGB PWM fans which can effectively lower the operation noise and enhance thermal efficiency. The fans can be either controlled by the physical RGB button on the I/O panel or motherboard software from ASUS, GIGABYTE, MSI, and ASRock. There are 27 RGB lighting modes to play around with when using the physical RGB button, and it’s simple to switch between physical button control and motherboard software control by long pressing the RGB button for three seconds.

PSU Cover & Pre-Installed Vertical GPU Holder

The built-in PSU cover is designed to hide unsightly cables with overall good ventilation. The pre-installed GPU holder enables vertical GPU installation, but also helps reduce the weight on the PCI-E slots.

Excellent Dust Filtration

The Divider 370 TG Snow ARGB has a well-designed removable magnetic fan filter on the top and the inner right side. At the base, the removable filter provides excellent dust protection and dirt reduction, ensuring a dust-free environment.

Air Intake and Exhaust

The cooling performance of the Divider 370 TG Snow ARGB is excellent. The large airflow-optimized mesh panel at the front allow optimal air intake. Cooling exhausts are located at the rear of the case. On the top and right side, there are venting mechanisms for air intake or exhaust depends on the user’s overall PC layout design.

Excellent Hardware Support & Cooling Solution

The Divider 370 TG Snow ARGB has great hardware support. It can support a CPU cooler with a maximum height of 170mm, VGA with maximum length of 400mm (without radiator), a power supply with a length of up to 230mm (with HDD Cage), two 3.5” HDDs with two 2.5” SSDs or a total of four 2.5” SSDs. When it comes to cooling, the Divider 370 TG Snow ARGB comes preinstalled with three hydraulic bearing 120mm ARGB PWM fans which can effectively lower the operation noise and enhance the thermal efficiency, you can also choose to put three 140mm fans at the front and one 120mm fan at the rear. Moreover, it can hold up to three 120mm fans at the top, two 120mm fans on the right of the motherboard side. For radiator compatibility, it can support up to a 360mm at the front and top.

Handy I/O Ports

Two USB 3.0 and one HD Audio jack is placed on the top panel to grant direct access when needed.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Specifications

P/N : CA-1S4-00M6WN-00

Series : Divider

CASE TYPE : Mid Tower

Dimension (H x W x D)

491 x 220.3 x 469.1 mm

(19.3 x 8.7 x 18.5 inch)

NET WEIGHT : 7.44 kg / 16.4 lbs.

PANEL : 3mm Tempered Glass x 1

Color : White

MATERIAL : SPCC

COOLING SYSTEM

Front(intake):

120 x 120 x 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) x 2

Rear(exhaust):

120 x 120 x 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) x 1

Drive Bays Accessible Hidden : 2 x 3.5”, 2 x 2.5” or 4 x 2.5”

EXPANSION SLOTS : 7

MOTHERBOARDS

6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX),

12" x 9.6" (ATX), 12" x 13" (E-ATX)

I/O Port : USB 3.0 x 2, HD Audio x 1

PSU : Standard PS2 PSU (optional)

FAN SUPPORT

Front:

3 x 120mm, 2 x 120mm, 1 x 120mm

3 x 140mm, 2 x 140mm, 1 x 140mm

Top:

3 x 120mm, 1 x 120mm

2 x 140mm, 1 x 140mm

Right (M/B Side):

2 x 120mm, 1 x 120mm

Rear:

1 x 120mm

RADIATOR SUPPORT

Front:

1 x 360mm, 1 x 240mm, 1 x 120mm

1 x 280mm, 1 x 140mm

Top:

1 x 360mm, 1 x 240mm, 1 x 120mm

1 x 280mm, 1 x 140mm

Right (M/B Side):

1 x 240mm, 1 x 120mm

Rear:

1 x 120mm

CLEARANCE

CPU cooler max height:

170mm

VGA max length:

340mm (with radiator)

400mm (without radiator)

PSU max length:

230mm (with HDD Cage)