Arctic MX-6 2g ULTIMATE Performance Thermal Paste (ACTCP00079A)

Application with a Spatula Is Not Possible

MX-6 is a highly viscous, high-performance paste. It cannot be spread with a spatula. Instead, use the contact pressure of the cooler.

20% Better Performance

With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. We measured the absolute thermal resistance of both pastes on our lab-testing machine, which is much more accurate than a CPU

Optimal Consistency for Every Application

Depending on personal preference and area of application, a thinner or thicker thermal compound may be preferred. Excellent non-drying and non-bleeding properties ensure constant long-term performance

Proven Quality

We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.

Simply the Paste

The ARCTIC MX-6 reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.

Risk-Free Application

MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.

Versatile Range of Applications

With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect?. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.

Easy Application

Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler.

Specification

Viscosity: : 45.000 poise

Density: : 2.6 g/cm³

Continuous Use Temperature: : -50~150 ℃

Volume Resistivity: : 1.8 x 1012 Ω-cm

Breakdown Voltage: : 7.5 kV/mm

Thermal Conductivity : FAQ

Colour : Grey

Packaging

Width: 152 mm

Height: 12 mm

Length: 23 mm

Weight: 0.009 kg